ITO FTO Conductive Glass With Bus Bar Anti-Reflective Coating
video

ITO FTO Conductive Glass With Bus Bar Anti-Reflective Coating

ITO Coated Conductive Glass ITO conductive glass is made of silicon dioxide (SiO2) and indium tin oxide (commonly known as ITO) film plated by magnetron sputtering method on the basis of soda-lime or borosilicate glass. FTO conductive glass FTO conductive glass is fluorine-doped SnO2 transparent conductive glass (SnO2: F), referred to as FTO.
Send Inquiry

Description

Technical Parameters

 

ITO glass parameters

 
Product Name:
ITO coated glass substrate, ITO conductive glass slide
Standard Size
(Length × width):
1" x 3" (25.4x76.2 mm), 1" x 1" (25.4x25.4 mm),
10 x 10 mm, 50 x 50 mm, 100 x 100 mm, 300 x 300 mm
(Or specific size can be customized)
Standard Thickness:
0.5mm, 0.7mm, 1.1mm, 2.0mm or 3.0mm (other thickness can be customized.)
Resistance :
4~5 ohm/sq, 6~8 ohm/sq,10~15 ohm/sq,20~30 ohm/sq, 30~40 ohm/sq, 60~80 ohm/sq, 80~100 ohm/sq, 300~500 ohm/sq, or others
Transmittance:
≥87% (at 550nm wave length)
ITO thin Film thickness:
185nm ( 6~8 ohm/sq);
135nm ( 10~15 ohm/sq)
Glass substrate
soda-lime glass
Application:
Mobile phone screens, PDAs, calculators, electronic watches, electromagnetic shielding, photocatalysis, solar cells, biological
experiments, major university laboratories and other new scientific and technological fields;
product-1-1

 

How to use and store conductive glass
 
1. When taking and putting it down, it can only touch the four sides, not the conductive glass ITO surface;
2. Handle with care, not collide with other fixtures and machines;
3. If you store for a long time, you must pay attention to moisture, the humidity should be below 65%, so as not to affect the resistance and transmittance of the glass.
4. The glass should be placed vertically, and the stacking between the glasses should not exceed two layers.

 

 
 
ITO glass cleaning
 
During the production, packaging, and transportation of ITO/FTO conductive glass, the surface of the glass may be contaminated by impurities such as dust or grease. Before using ITO/FTO conductive glass, it is necessary to clean it. There are many cleaning methods, the most commonly used is ultrasonic cleaning with organic solvents. Grease stained on the glass surface is insoluble in water, but it is soluble in organic solvents such as toluene, acetone, and ethanol.

 

 
 
Product pictures
.
product-1-1

Hot Tags: ito fto conductive glass with bus bar anti-reflective coating, China ito fto conductive glass with bus bar anti-reflective coating manufacturers, suppliers, Tempered Glass, Ultra Clear Low Iron Glass, Ultra Clear Glass, anti reflective coating on solar panels, anti glare phone, AR Coated Cover Tempered Glass

Send Inquiry