ITO Coated Glass
Description
Technical Parameters
What Is ITO Coated Glass?
ITO (Indium Tin Oxide) glass is a particular kind of glass with a thin coating of indium tin oxide on it. This coating is beneficial in a range of applications, particularly in the field of electronics because it is transparent and electrically conductive.
Since the indium tin oxide coating on ITO glass is often only a few nanometers thick, it has little impact on the glass' optical characteristics. The glass does, however, benefit from some special electrical features, such as a low sheet resistance and good visible spectrum transmittance.
Working Temperature
Up to 300 degrees centigrade (If work temperature must be up to 600 degree, FTO is also available)
Indium Tin Oxid (ITO) coated glass belongs to the group of TCO (transparent conducting oxide) conductive glasses. ITO glass has the property of low sheet resistance and high transmittance, and it is widely used in the production and research of OLED, OPV, electrochromic device, e-book, electrochemistry, Low-Temperature Solution-Processed Perovskite Solar Cells, etc.
Transmittance of ITO Coating
Application
ITO coatings have advantageous electrical and optical properties, can be applied to substrates like glass, and are thus widely used in a variety of applications. ITO coatings are frequently used for screens, displays, sensors, and energy-efficient windows.
For particular uses, specialized anti reflective and optical coatings are available. ITO coatings are employed in many various industries, including the automotive, military, and R&D sectors.
Working Environment Overview
Edge Treatment
Factory Overview & Customer Visit
Company Profile
Customer Visit
FAQ
Q: Should glass be tempered and what's the difference between Chemical tempered and Physical tempered?
To small size/thickness less than 3.2mm,we recommend chemical tempered.(surface toughen by 6-7H).
To bigger size/thickness above 3.2mm, we recommend physical tempered.
Base on thermal tempered, the fragmentation test standard / partical sizes & quantity could be set base on different thickness.
The glass flatness could be asked after tempering.
Q: What kind of glass will be used?
LightingWe usually use clear / ultra clear float glass for production, depends on customer's need.
Cover glassWe usually use AGC(Dragontail) for production, but also available in gorilla/NEG etc. base on customer's need
Furniture glass We usually use high quality flat/bending glass
Q. Do you accept small order?
Any order quantity is welcome. But some type of products are high cost that not suitable for small order.
Q: Can I get samples and check your Quality?
Yes. Contect our sales with detailed Requirements /Drawings, or just an idea or a sketch. We will deliver the sample to you.
Q: What should I provide to get a quotation?
1. The kind of glass, thickness and size.
2. Drawing of the glass
3. Requirements in details.
4. Order quantity.
5. Others you think is necessary
6. Process balance payment and advise us your opinion on safe delivery.
7. Enjoy your order.
Q: Where is your company? Which port near you? Can I pay a visit?
Welcome. Our factories are located in Guangdong China, near to Shenzhen and Guangzhou port. Please let us know if you want to come, we will advise route guidance in details.
Hot Tags: ito coated glass, China ito coated glass manufacturers, suppliers, ITO Coated Glass, ito coated glass slides, ITO Glass, ITO Glass Slides, Indium Tin Oxide Glass, China ITO Coating Glass with Pattern for Laboratory
Delivery & Payment
Packaging:
Step 1: PE film coating(Normally) / paper(For seashipment prevent wet).
Step 2: Kraft paper for fixation.
Step 3: Carton for glass safety protection.
Step 4: Custom make plywood case with hinge for custom(fumigation + convenient inspection) convenience.
Step 5: Packing strap for further fixation.
Port
Shenzhen or Hongkong
Previous
ITO Coated Body Scale Glass PanelNext
ITO Conductive GlassSend Inquiry
